Montero V6-3.8L SOHC (2005)
Drive/Propeller Shaft: Overhaul
Part 1 Of 2
Part 2 Of 2
DISASSEMBLY AND ASSEMBLY REAR PROPELLER SHAFT
CAUTION: The CFRP rear propeller shaft cannot be separated.
FRONT PROPELLER SHAFT
Required Special Tool:
^
MB990840: Universal Joint Removal/Installer
DISASSEMBLY SERVICE POINTS
<<A>> SNAP RING REMOVAL
Make mating marks on the flange yoke and propeller shaft. Then, remove the snap rings.
<<B>> JOURNAL BEARING REMOVAL
CAUTION: Do not tap the journal bearings to remove them, as this will upset the balance of the propeller shaft.