Montero V6-3.8L SOHC (2005)
4. Fill a sealant gun with adhesive. Then apply the adhesive evenly around the windshield within 30 minutes after applying the primer.
NOTE: Cut the tip of the sealant gun nozzle into a V shape to simplify adhesive application.
5. Align the mating marks on the windshield and the body, and lightly press the windshield evenly so that it adheres completely.
6. Use a spatula or similar tool to remove any excessive adhesive. Clean the surface with 3M TM AAD Part number 8906 or equivalent. Avoid
moving the vehicle until the adhesive sets.
CAUTION:
-
Do not move the vehicle unless absolutely necessary.
-
When testing for water leakage, do not pinch the end of the hose to spray the water.
7. Wait 30 minutes or more, and then test for water leakage.
