Montero V6-3.8L SOHC (2005)
CAUTION: Be careful not to damage the windshield glass when removing the wiper motor and link assembly.
1. Remove the five mounting bolts of the wiper motor and link assembly and disconnect the connector.
2. To protect the windshield, apply duct tape to the entire circumference of the glass near the wiper motor and link assembly installation position.
INSTALLATION SERVICE POINT
]]A[[ WIPER ARM AND BLADE ASSEMBLY INSTALLATION
Install the wiper blade at the specified position (standard value).
Standard value:
Driver's side: 20 - 30 mm (0.8 - 1.2 inches)
Passenger's side: 25 - 35 mm (1.0 - 1.4 inches)