Montero 4WD L4-2555cc 2.6L SOHC (1984)
Alignment: Service and Repair
Camber
Fig. 1 Camber setting
DESCRIPTION
Camber refers to the angle at which a wheel leans in or out, Fig. 1. Positive camber is when the wheel leans outward and negative camber is when the
wheel leans inward.
FRONT ADJUSTMENT
With 4 Wheel Drive
Adjust camber by adjusting number of shims between upper arm shaft and arm post of side frame. A .039 in. adjustment of shim thickness provides
approximately 13 minutes adjustment of camber.
REAR ADJUSTMENT
Camber and toe-in are preset to specifications and cannot be adjusted. If camber is out of specification, bent or damaged components must be
replaced.