Montero 4WD V6-3.5L SOHC (1998)
<A> Adaptor Plate A/Drive Plate/Adaptor Plate B Removal.
Use the special tool to secure the flywheel assembly or drive plate, and remove the bolt.
<B> Oil Seal Removal.
1) Cut out a portion in the crankshaft oil seal lip.
2) Cover the tip of a screwdriver with a cloth and apply it to the cutout in the oil seal to pry off the oil seal.
CAUTION: Take care not to damage the crankshaft and oil seal case.
Installation
Installation in reverse order as removal.
Installation Service Points
>A< Oil Seal Installation.
Using the special tool, press-fit a new crankshaft rear oil seal into the oil seal case.
>B< Adaptor Plate B/Drive Plate/Adaptor Plate A Installation.
Use the special tool to secure the drive plate, and tighten the bolts.
Post-installation Operation:
-
Transmission Removal.