Montero 4WD V6-3.5L SOHC (1998)
REMOVAL SERVICE POINTS
<A> HIGH-PRESSURE FUEL HOSE REMOVAL
CAUTION: Cover the high-pressure hose connection with shop towels to prevent splashing of fuel that could be caused by some residual pressure in
the fuel pipe line.
<B> HIGH-PRESSURE FUEL HOSE REMOVAL
Hold the fuel filter with a wrench and use an eye wrench to remove the eye bolt which is securing the high-pressure fuel hose.
<C> HIGH-PRESSURE FUEL HOSE INSTALLATION
(1) Insert the high-pressure fuel hose connector securely into the pipe until the retainer goes past the spool of the pipe.
(2) After inserting, gently pull the connector in the direction of A in the illustration and check that the connector does not pull out.
INSTALLATION SERVICE POINTS
>A< FUEL RETURN HOSE/FUEL VAPOR HOSE INSTALLATION
Insert each hose approximately 25-30 mm (1.0 - 1.2 in.) into the corresponding pipe.
>B< HIGH-PRESSURE FUEL HOSE INSTALLATION
(1) Insert the high-pressure fuel hose connector securely into the pipe until the retainer goes past the spool of the pipe.
(2) After inserting, gently pull the connector in the direction of A in the illustration and check that the connector does not pull out.
>C< HIGH-PRESSURE FUEL HOSE (FUEL RAIL SIDE) INSTALLATION
Insert the hose, being careful not to damage the O-ring, and tighten securely.
INSPECTION
-
Check the fuel hoses and pipes for cracks, bends, deformation, deterioration or clogging.
-
Check the fuel filter for clogging or damage.
-
Check the canister for clogging or damage.
