Montero 4WD V6-3.5L SOHC (1998)
>A< Front Speed Sensor Installation.
Insert a feeler gage into the space between the speed sensor's pole piece and the ABS rotor's toothed surface, and check to be sure that the
clearance at all points is at the standard value.
NOTE: If the clearance between the speed sensor's pole piece and the ABS rotor's toothed surface i, not within the standard value range, it is
probable that the ABS rotor is incorrectly installed, so re-check installation.
Post-installation Operation:
-
Anti-Lock Braking System Checking.