Montero 4WD V6-3.5L SOHC (1998)
Ignition Lock: Testing and Inspection
KEY INTERLOCK MECHANISM CHECK
Completely stop the vehicle and switch off the engine before making the check.
1. Check that the selector lever cannot be moved from the P position to any other position under the following conditions.
At the same time, check that the button cannot be pressed.
Ignition key position: LOCK or removed
Brake pedal: Depressed
2. Check that the selector lever can be moved smoothly from the position to any other position under the following conditions.
Press the button a few times and check that the selector lever moves smoothly.
Ignition key position: ACC
Brake pedal: Depressed
Button pressed
3. Check that the ignition key cannot be turned to the LOCK position at all positions of the selector lever other than P.
Check that the ignition key turns smoothly to the LOCK position when the selector lever is set to the P position and the button is released.
4. If the above checks are not okay, adjust the key interlock cable mechanism as follows.
1) Remove the front console assembly.
2) Move the selector lever to the P position.
