Montero 4WD V6-3.5L SOHC (1998)
>C< Bearing Installation (5)
Apply specified automatic transmission fluid to the outside of the bearing, and then use the special tools to press the bearing into the valve
housing.
Specified fluid: Automatic transmission fluid "DEXRON II"
>D< Seal Ring Installation (8)
When installing the seal ring, press it firmly into the valve groove.
>E< Cage/Ball/Bearing Race/Main Shaft Installation (9, 10, 11 & 12)
1. Apply specified automatic transmission fluid to the valve body.
Specified fluid: Automatic transmission fluid "DEXRON II"
2. Wrap vinyl tape around the serrated part so that the oil seal won't be damaged when the valve body is installed to the valve housing.
3. Install the valve body to the valve housing.
4. Align the cage's hole and the channel in the main shaft, and insert two or three balls.
5. Insert the remainder of the balls into the cage's hole while pressing the ball with the bearing race.
