Montero 4WD V6-3.5L SOHC (1998)
When connecting hoses to pipes with a stepped part, insert securely as far as the stepped part.
>B< Return Pipe A/Feed Pipe A/Clamp Installation
1. Provisionally tighten the return pipe A and feed pipe A flare nuts to the transmission and transfer, and after clamping the pipes with each
clamp, fully tighten the flare nuts.
Also, tighten all of the clamps, starting with those that are the closest to the transmission and transfer assembly.
2. When connecting the pipes to the hoses, insert securely as far as the stepped part.
>C< Hose C/Hose B/Hose A Installation
When connecting the pipes to the hoses, insert securely as far as the stepped part.
INSPECTION
-
Check the hose and pipe for crack, damage and clogging.
-
Check for rusted or clogged radiator oil cooler.
-
Check the fluid cooler fins for bends, damage or foreign materials.