Montero LS 4WD V6-2972cc 3.0L SOHC 12 Valve (1994)
Brake Rotor/Disc: Service and Repair
2WD
1. Disconnect battery ground cable.
2. Raise and support vehicle.
3. Remove front brake assembly and suspend assembly with wire.
4. Remove hub cap, then the cotter pin.
5. Remove slotted nut and washer, then the outer bearing.
6. Remove front hub and rotor assembly.
7. Reverse procedure to install, noting the following:
a. Tighten slotted wheel bearing nut to specifications.
b. Loosen slotted nut completely.
c. Retorque slotted nut to 6 ft. lbs.
