Montero LS 4WD V6-2972cc 3.0L SOHC 12 Valve (1994)
Dimmer Switch: Testing and Inspection
Column Switch Inspection
Dimmer Switch Table
Passing Switch Table
1. Remove the column cover lower.
2. Remove the column cover upper.
3. Turn the screws indicated by arrows in the illustration, and then remove the switch.
4. Operate the switch and check for continuity between the terminals.
NOTE: P1 represents the passing operation when the dimmer switch
is in the LOW BEAM position, and P2 represents the operation when it is in the high beam position.