mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Headlamp Relay > < Hazard Warning Switch|Testing and Inspection
Page 1
background image

Headlamp Bulb: Service and Repair

Replaceable Bulb Replacement

1. Remove the engine coolant reserve tank (left side only).
2. Disconnect the harness connector, and then pull out the socket cover.

Replaceable Bulb Replacement

3. Remove the locking cap by rotating it counter-clockwise, and then draw the socket together with bulb.

CAUTION:  Never hold the halogen light bulb with a bare hand, dirty glove, etc. It the glass surface is dirty, be sure to clean it with alcohol, paint
thinner, etc., and install it after drying it thoroughly.

4. If the socket cover is not securely installed, the lens will be out of focus, or water will get inside the light unit, so the cover should be securely

installed.

Headlamp Relay > < Hazard Warning Switch|Testing and Inspection