Montero LS 4WD V6-2972cc 3.0L SOHC 12 Valve (1994)
7. Turn the key to the START position.
8. Using a voltmeter, check the voltage between power transistor harness connector terminal 1 and ground.
Voltage: 2 - 6 VDC
9. Turn the key to the ON position.
10. Using a voltmeter, check the voltage between ignition timing adjustment connector and ground.
Voltage: 4.0 - 5.2 VDC
If any of the previous tests produce unsatisfactory results, the harness will need to be repaired or replaced. Once repairs have been completed, road
test the vehicle to confirm that the repair has corrected the problem.
If the same problem reoccurs, it is possible that there is an intermittent failure of the component or the ECU. Check for looseness at all harness
junctions and test for an intermittent failure.
