Montero LS 4WD V6-2972cc 3.0L SOHC 12 Valve (1994)
Throttle Position Sensor: Adjustments
1. Disconnect the throttle position sensor connector.
2. Use jumper wires to connect an ohmmeter between terminal (2) (closed throttle position switch) and terminal (1) (sensor ground) of the throttle
position sensor.
3. Insert a feeler gauge with a thickness of 0.65 mm (0.0256 in.) between the fixed SAS and throttle lever.
4. Loosen the throttle position sensor mounting bolts and turn the throttle position sensor body fully clockwise. In this condition, check for continuity
between terminal (1) and terminal (2).
