Montero LS 4WD V6-2972cc 3.0L SOHC 12 Valve (1994)
Starter Motor: Testing and Inspection
Magnetic Switch Return Test
Fig. 9 Testing Magnetic Switch Return Function
1. Disconnect field coil wire from "M" terminal of magnetic switch, Fig. 9.
2. Connect a 12 volt battery between "M" terminal and body ground. This test must be performed in less than ten seconds to prevent coil from
burning out.
3. Pull pinion out and release. If pinion quickly returns to its original position, magnetic switch is operating correctly. If pinion does not return,
replace magnetic switch.
