mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Lateral Stabilizer Rod > < Steering - Tie Rod Torque Specifications Change|Page 4208
Page 1
background image

Control Arm: Service and Repair

1. Disconnect battery ground cable.
2. Raise and support vehicle.
3. Support rear axle using suitable jack stand.

Fig. 11  Lower Arm Replacement

Fig. 12  Lower Arm Bushing Installation

4. Replace lower arm in numbered sequence as shown Fig. 11, installing lower arm front bushing as shown Fig. 12.

Lateral Stabilizer Rod > < Steering - Tie Rod Torque Specifications Change|Page 4208