Montero LS 4WD V6-2972cc 3.0L SOHC 24 Valve (1996)
Headliner: Customer Interest
Headliner - Loose/Sagging
NO.: TSB-97-52A-002
DATE: April, 1997
MODEL: 1992-97 Montero
SUBJECT:
HEADLINER COMING LOOSE AND SAGGING
PURPOSE
This bulletin contains procedures for repairing Montero rear headliners that come loose and sag.
CAUSE AND REMEDY
The rear headliner comes loose in the area where it attaches to the front headliner because of insufficient attachment force. This condition can be
repaired by drilling three holes in the front and rear headliners and attaching the headliners together with three additional clips.
AFFECTED VEHICLES
1992-97 Montero
REPAIR PROCEDURES
1.
Remove the rear headliner. Removal procedures are in section 52A of the service manual.
2.
Drill three 6.9 mm holes in the rear headliner at the locations indicated in the illustration.
3.
Drill three 15 mm holes in the front headliner at the indicated locations.
4.
Reinstall the rear headliner. Attach the rear headliner to the front headliner using the clips listed in the Parts Information section of this bulletin.
PARTS INFORMATION
WARRANTY INFORMATION
