Montero LS 4WD V6-2972cc 3.0L SOHC 24 Valve (1996)
<B> ROCKER ARM SHAFT INSTALLATION
(1) Install the rocker arm shafts "A" and "B" to the camshaft bearing cap No.1 and insert the bolts into the holes of the bearing cap and shafts.
(2) Install the rocker arm shafts with the notched side facing the bearing cap No.1 and the oil grooved side facing downward. The shaft with a smaller
oil hole is the rocker arm shaft "A".
<C> ROCKER ARM, ROCKER ARM SHAFT INSTALLATION
(1) Insert the lash adjuster to rocker arm, being careful not to spill the diesel fuel. Then use the special tool to prevent the adjuster from falling while
installing it.
(2) Apply a minimum amount of the specified sealant on the four places of the cylinder head.
NOTE: Be sure the sealing agent does not swell out onto the cam journal surface of the cylinder head. If it swells out, immediately wipe it oft
before it can dry.
Specified sealant:
3M NUT Locking No.4171 or equivalent
