Montero LS 4WD V6-2972cc 3.0L SOHC 24 Valve (1996)
STEP 3. Check for an open circuit or a short-circuit to ground between the crankshaft position sensor and the engine control module.
-
Engine control module connector: Disconnected
-
Crankshaft position sensor connector: Disconnected
OK: GO TO STEP 4
NG: Repair the harness. (A2 - 89)
STEP 4. Measure the applied voltage.
-
Crankshaft position sensor connector: Disconnected
-
Engine control module connector: Connected
-
Ignition switch: ON
Voltage (V): 4.8 - 5.2
OK: STOP
NG: Replace the engine control module.