Montero LS 4WD V6-2972cc 3.0L SOHC 24 Valve (1996)
STEP 4. Measure the applied voltage.
-
Vehicle speed sensor connector: Disconnected
-
Engine control module connector: Connected
-
Ignition switch: ON
Voltage (V): 4.5 - 4.9
OK: STOP
NG: Replace the engine control module.
REED SWITCH CHECK
(1) Check that the speedometer operates correctly.
(2) Start the engine. Do not disconnect the connectors. Check the continuity between terminals (1) and (2) while moving slowly the vehicle forward.
The continuity and discontinuity should alternate.
