Mitsubishi Workshop Service and Repair Manuals

Using Scan Tool

HARNESS INSPECTION

STEP 1. Check for continuity between the crankshaft position sensor and the MFI relay.
-

MFI relay connector: Disconnected

-

Crankshaft position sensor connector: Disconnected

NOTE:
-

Touch the ohmmeter problems to both ends of the harness.

OK: GO TO STEP 2
NG: Repair the harness. (A3 - B3)

STEP 2. Check for continuity in the ground circuit.
-

Crankshaft position sensor connector: Disconnected

OK: GO TO STEP 3
NG: Repair the harness. (A1 - Ground)