Montero LS 4WD V6-2972cc 3.0L SOHC 24 Valve (1996)
Ignition Power Transistor
Ignition Power Transistor Continuity Table
No. 3 - No. 6 Coil Side
1. Connect the negative (-) terminal of the 1.5 V power supply to terminal (4) of the ignition power transistor; then check whether there is continuity
between terminal (11) and terminal (4) when terminal (1) and the positive (+) terminal are connected and disconnected.
NOTE: Connect the (-) probe of the circuit tester to terminal (11).
2. Replace the ignition power transistor if there is a malfunction.
