Montero LS 4WD V6-2972cc 3.0L SOHC 24 Valve (1996)
Alternator Brush: Service and Repair
Disassembly Service Point
Stator/Regulator And Brush Holder Removal
1. When removing the stator, unsolder stator lead wire from the main diode of the rectifier.
2. When removing the brush holder, unsolder it from the rectifier
CAUTION:
1. When soldering or unsoldering, be careful to make sure that heat of soldering iron is not transmitted to diodes for a long period. Finish
soldering or unsoldering in as short a time as possible.
2. Be careful that no undue force is exerted to leads of diodes.
