mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Steering Column - Knocking Noise Or Vibration|Page 5237 > < Steering Column - Knocking Noise Or Vibration|Page 5228
Page 1
background image

Pitman Arm: All Technical Service Bulletins
Steering Column - Knocking Noise Or Vibration

NO.: TSB-96-37A-03
DATE: December, 1996
MODEL: 1994-96 Montero

SUBJECT:
STEERING COLUMN KNOCKING NOISE OR VIBRATION

PURPOSE

A knocking noise and/or vibration at the steering column may be heard or felt when driving on rough roads. This condition may be caused by:

^

Damaged tie rod, idler arm or Pitman arm

^

Incorrect input shaft free play in the steering gear box

^

Loose bearing in the lower portion of the steering column

Follow the diagnosis chart in this bulletin for appropriate repair procedures for affected vehicles.

AFFECTED VEHICLES

1994-96 Montero models produced before 11/95.

Improved steering columns and steering gear boxes are installed during production on models produced after 11/95.

Steering Column - Knocking Noise Or Vibration|Page 5237 > < Steering Column - Knocking Noise Or Vibration|Page 5228