mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Transfer Case > < Automatic Transmission Fluid Temperature Switch Check
Page 1
background image

Transmission Temperature Sensor/Switch: Testing and Inspection
Oil Temperature Sensor Check

1. Disconnect the oil temperature sensor connector.
2. Measure the resistances between terminals No. 1-2 of the oil temperature sensor connector and check that they match the values below.

Oil temperature Resistance value:

At 25°C (77°F): 10k Ohms
At 120°C (248°F): 615 Ohms

3. If the resistance is outside the standard value, replace the oil temperature sensor.

Transfer Case > < Automatic Transmission Fluid Temperature Switch Check