Montero LS 4WD V6-3.5L SOHC (1997)
Clutch Switch: Testing and Inspection
INSPECTION
1. Check and adjust the clutch pedal height.
2. Measure the clutch pedal full stroke (E).
Standard value (E): 145 mm (5.72 inch)
If the clutch pedal full stroke is outside the standard value, adjust by turning the push rod.
3. Measure the clearance (F) in the illustration with the clutch pedal fully depressed condition (full stroke).
Standard value (F): 4.5-5.5 mm (0.177-0.217 inch)
If the clearance is outside the standard value, adjust by loosening the interlock switch lock nut and turning the interlock switch.