mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 6435 > < Initial Inspection and Diagnostic Overview|Page 6433
Page 20
background image

Q: Isn't there any abnormality on the geomagnetism sensor?

YES: There is no action to be taken.

NO: Step 2.

STEP 2. Check of own vehicle position

Q: Is the geomagnetism stable at the place?

YES: Go to Step 4.

NO: Go to Step 3.

STEP 3. Move the vehicle to the geomagnetically stable location to re-check the geomagnetism.

Q: Isn't there any abnormality at the geomagnetism sensor mode?

YES: There is no action to be taken.

NO: Step 4.

STEP 4. Check of RV meter for magnetization.

Q: Does the indication return to normal when the carrier antenna that is mounted on the body by a magnet, a magnet or metal existing nearby the RV
meter is removed?

YES: There is no action to be taken.

NO: Replace the RV meter.

STEP 5. Recheck for malfunction

Q: Is a malfunction eliminated?

YES: If no malfunctions are not found in all steps, an intermittent malfunction is suspected. Refer to How to Use Troubleshooting/Inspection Service
Points-How to Cope with Intermittent Malfunction.

NO: Replace the RV meter.

06 - Inspection Procedure

The Air-Conditioner Information is Not Displayed.

Initial Inspection and Diagnostic Overview|Page 6435 > < Initial Inspection and Diagnostic Overview|Page 6433