Montero LTD 4WD V6-3.5L SOHC (2002)
Speedometer Head: Testing and Inspection
SPEEDOMETER CHECK
Adjust the pressure of tires to the specified level. (Refer to On-vehicle Service.)
CAUTION: Place the transfer shift lever to "2H" position.
1. Set the vehicle onto a speedometer tester and use wheel chocks to hold the front wheels.
2. To prevent the sideward shaking of the front wheel, attach the puller on the towing hook and the tie down hook at front side and connect its both
ends to the anchor plate.
3. To prevent the jumping out of the vehicle, attach the chain and the wire whose both ends are tightly fixed to the rear towing hook.
CAUTION: Do not increase/decrease speed rapidly while testing.
4. Check if the speedometer indicator range is within the standard values.
Standard Value
5. If not to the standard value, inspect for proper tire size. If not correct, replace tires with original size tires and retest. If correct, replace the
speedometer. If still not to standard value, replace vehicle speed sensor.