mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2096 > < Initial Inspection and Diagnostic Overview|Page 2094
Page 69
background image

STEP 14. Check the back door lock actuator.

Remove the back door lock actuator, and check it. Refer to Door Handle and Latch. 

Q: Does the back door lock actuator work normally?

YES: Go to Step 15.

NO: Replace the back door lock actuator. Check that all the doors can be locked and unlocked normally.

STEP 15. Check ETACS-ECU connector D-222 and back door lock actuator connector I-05 for damage.

Q: Are ETACS-ECU connector D-222 and back door lock actuator connector I-05 in good condition?

YES: Go to Step 16.

NO: Repair or replace the connector. Refer to Harness Connector Inspection. Check that all the doors can be locked and unlocked normally.

Initial Inspection and Diagnostic Overview|Page 2096 > < Initial Inspection and Diagnostic Overview|Page 2094