mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2402 > < Initial Inspection and Diagnostic Overview|Page 2400
Page 375
background image

STEP 12. Check back door switch connector G-15 and ETACS-ECU connector D-222 for damage.

Q: Are back door switch connector G-15 and ETACS-ECU connector D-222 in good condition?

YES: Go to Step 13. 

NO: Repair or replace the connector. Refer to Harness Connector Inspection. If the functions, which are described in "CIRCUIT OPERATION",
work normally, the input signal from the back door switch should be normal. 

Initial Inspection and Diagnostic Overview|Page 2402 > < Initial Inspection and Diagnostic Overview|Page 2400