Montero Sport V6-3.5L SOHC (2004)
Oil Filter: Service and Repair
ENGINE OIL FILTER (REPLACE)
The quality of replacement filters varies considerably. Only high quality filters should be used to assure most efficient service. Genuine oil filters require
that the filter is capable of withstanding a pressure of 1,765 kPa (256 psi) are high quality filters and are recommended as follows:
Oil Filter Part Number:
Mitsubishi Genuine Parts:
<6G72> MD136790 or equivalent
<6G74> MD352626 or equivalent
ENGINE OIL FILTER SELECTION
This vehicle is equipped with a full-flow, throw-away oil filter. The same type of filter is recommended as a replacement filter for this vehicle. It is
possible, particularly in cold weather, that this vehicle may develop high oil pressure for a short duration. Make sure that any replacement filter used on
this vehicle is a high-quality filter. The filter can withstand a pressure of 1,765 kPa (256 psi) [manufacturer's specifications] to avoid the filter and
engine damage. The following is a high-quality filter and is strongly recommended for use on this vehicle: Mitsubishi Engine Oil Filter Part number
MD136790.
Any replacement oil filter should be installed in accordance with the oil filter manufacturer's installation instructions.
1. Remove the under cover.
2. Drain the engine oil by removing the oil drain plug.
3. Use an oil filter wrench to remove the engine oil filter.
4. Clean the contacting surface of the filter bracket.
5. Lubricate the O-ring of the new oil filter with a small amount of new engine oil.
