mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Ignition Switch|Page 3952 > < Ignition Switch|Page 3950
Page 8
background image

1. Remove the driver's under cover.
2. Remove the lower and upper column covers.

3. Disconnect wiring connector D-16 from the key reminder switch and measure at the switch side.
4. Connect a vehicle battery as shown, and then check the ignition key hole illumination light illuminates.

Q: Does the situation key hole illumination light illuminate?

YES: Go to Step 9.

NO: Replace the key reminder switch.

STEP 9. Check the power supply for the ignition key hole illumination light.

1. Disconnect the key reminder switch connector D-16 and measure at the harness side.

Ignition Switch|Page 3952 > < Ignition Switch|Page 3950