Montero Sport V6-3.5L SOHC (2004)
1. Disconnect the driver's side door switch connector E-33 and the harness side.
2. Measure the voltage between terminal 2 and ground.
-
The measured value should be approximately 5 volts.
Q: Does the measured voltage correspond with this range?
YES: There is no action to be taken.
NO: Go to Step 6.
STEP 6. Check driver's side door switch connector E-33 for loose, corroded or damaged terminals, or terminals pushed back in the connector.
Q: Is driver's side door switch connector E-33 damaged?
YES: Repair or replace it. Refer to Harness Connector Inspection. The tachometer should work normally.
NO: Go to Step 7.
