mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Ignition Switch|Page 4004 > < Ignition Switch|Page 4002
Page 22
background image

STEP 9. Check the connector between daytime running light-ECU connector A-96 and headlight relay connector A-52X for loose, corroded or
damaged terminals, or terminals pushed back in the connector.

Q: Is connector between daytime running light-ECU connector A-96 and headlight relay connector A-52X in good condition?

YES: Go to Step 10.

NO: Repair or replace the damaged components. Refer to Harness Connector Inspection.

STEP 10. Check the harness wire between daytime running light-ECU connector A-96 (terminal No.5) and headlight relay connector A-52X

Q: Is harness wire between daytime running light-ECU connector A-96 (terminal No.5) and headlight relay connector A-52X in good condition?

YES: Go to Step 11.

NO: Repair or replace the damaged components. Refer to Harness Connector Inspection.

STEP 11. Check the daytime running light relay (lower) and (upper).

Ignition Switch|Page 4004 > < Ignition Switch|Page 4002