mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 4294 > < Initial Inspection and Diagnostic Overview|Page 4292
Page 4
background image

STEP 3. Check the harness wires between dome light connector E-20 (terminal No.2) <vehicles with sunroof> or E-21 terminal No.2) <vehicles
without sunroof>, cargo space light connector E-16 (terminal No.2) and ETACS-ECU connector D-27 (terminal No.44).

NOTE:  After checking junction block connector D-07 and D-14, check the wires. If junction block connector D-07 and D-14 are damaged, repair or
replace them. Refer to Harness Connector Inspection.

Initial Inspection and Diagnostic Overview|Page 4294 > < Initial Inspection and Diagnostic Overview|Page 4292