mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Symptom Index|Page 4457 > < Symptom Index|Page 4455
Page 25
background image

2. Check that the voltmeter indicator deflects once when the ignition key is moved from the "LOCK" position to the "ON" position.

Q: Does the voltmeter indicator deflect?

YES: Replace the ETACS-ECU. Check that the malfunction is eliminated.

NO: Go to Step 3.

STEP 3. Measure the continuity of the key reminder switch.

1. Remove the driver's side under cover.
2. Remove the column covers, lower and upper.
3. Disconnect wiring connector D-16 from the key reminder switch and measure at the key reminder switch side.

4. Measure the resistance between terminal numbers 4 and 6.

Q: Does the measured resistance value correspond with this range?

YES: Go to Step 4.

NO: Replace the key reminder switch. Then check that the malfunction is eliminated.

STEP 4. Check the input signal from the key reminder switch.

Check that the tone alarm stops sounding when terminal number 6 is grounded.

Q: Does the tone alarm stop sounding?

YES: Go to Step 5.

NO: Go to Step 7.

Symptom Index|Page 4457 > < Symptom Index|Page 4455