mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Symptom Index|Page 4468 > < Symptom Index|Page 4466
Page 36
background image

STEP 10. Check key reminder switch connector D-16 for loose, corroded or damaged terminals, or terminals pushed back in the connector.

Q: Is the key reminder switch connector D-16 in good condition?

YES: Go to Step 11.

NO: Repair or replace it. Refer to Harness Connector Inspection.

STEP 11. Check the harness wire between key reminder switch connector D-16 (terminal No.4) and body ground.

Q: Is the resistance wire between key reminder switch D-16 and body ground in good condition?

YES: There is no action to be taken.

NO: Repair or replace it. Refer to Harness Connector Inspection.

Symptom Index|Page 4468 > < Symptom Index|Page 4466