Montero Sport V6-3.5L SOHC (2004)
Ignition Switch: Component Tests and General Diagnostics
Ignition Switch Continuity Check
IGNITION SWITCH CONTINUITY CHECK
1. Remove the driver's side under cover.
2. Remove the column cover lower and upper.
3. Disconnect the wiring connector from the ignition switch.
4. Operate the switch and check the continuity between the terminals.
Ignition Key Ring Antenna Check
IGNITION KEY RING ANTENNA CHECK
Measure the continuity between terminal 1 and terminal 2.
Standard value: Less than 2 Ohms
