Montero Sport V6-3.5L SOHC (2004)
2. Turn the ignition switch to the "ON" position. (Do not start the engine.)
3. Check the throttle position sensor output voltage.
Standard value: 535 - 735 millivolts
4. If not within the standard value range, adjust by loosening throttle position sensor mounting bolts and turning the throttle position sensor body.
After adjusting, tighten the bolts securely.
5. Turn the ignition switch to the "LOCK" (OFF) position.
6. Disconnect scan tool MB991958.
When the scan tool MB991958 is not used, remove special tool MB991348, and connect the throttle position sensor connector.
NOTE: If a diagnostic trouble code is sent while adjusting the throttle position sensor, use scan tool MB991958 to erase the diagnostic trouble
code.
