mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Front Impact Sensor|Page 3418 > < Impact Sensor|Locations|Page 3415
Page 1
background image

Impact Sensor: Service and Repair
Front Impact Sensor

FRONT IMPACT SENSORS

WARNING:

-

Never attempt to disassemble or repair the SRS-ECU. If faulty, replace it.

-

Do not drop or subject the SRS-ECU to impact or vibration. If denting, cracking, deformation, or rust are discovered in the SRS-ECU,
replace it with a new SRS-ECU. Discard the old one.

-

After deployment of an air bag, replace the SRS-ECU with a new one.

-

Never use an ohmmeter on or near the SRS-ECU, and use only the special test equipment as described.

REMOVAL AND INSTALLATION

REMOVAL SERVICE POINT

[[A]] NEGATIVE (-) BATTERY CABLE DISCONNECTION

DANGER:  Wait at least 60 seconds after disconnecting the battery cable before doing any further work. (Refer to SRS SERVICE PRECAUTIONS.)

WARNING:  Battery posts, terminals and related accessories contain lead compounds. WASH HANDS AFTER HANDLING.

Front Impact Sensor|Page 3418 > < Impact Sensor|Locations|Page 3415