Montero Sport ES 4WD V6-3.0L SOHC (2002)
Fuel Gauge: Testing and Inspection
FUEL GAUGE RESISTANCE CHECK
CAUTION: When inserting the test probe into the power supply terminal, be careful not to touch the printer board.
1. Remove the power supply tightening screw.
2. Use an ohmmeter to measure the resistance between the terminals.
Standard value:
Power supply - Ground: 192 ohms
Power supply - Fuel gauge: 107 ohms
Fuel gauge-Ground: 85 ohms
3. If within the standard value, the fuel gauge is OK.
If not within the standard value, replace the fuel gauge.