mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Diagnostic Strategies|Page 6268 > < Diagnostic Strategies|Page 6266
Page 4
background image

-

Voltage should be 9 volts or more

Q: Is the voltage between terminal number 1 and body ground 9 volts or more?

YES: Go to Step 4.
NO: Go to Step 2.

STEP 2. Check harness connector E-59 at the inside rear view mirror (with compass and temperature display) connector for damage.

Q: Is harness connector E-59 is good condition?

YES: Go to Step 3.
NO: Repair or replace it. Go to Step 6.

STEP 3. Check the harness wires between the inside rear view mirror (with compass and temperature display) connector E-59 and ignition
switch (ACC).

Diagnostic Strategies|Page 6268 > < Diagnostic Strategies|Page 6266