Montero Sport ES 4WD V6-3.0L SOHC (2002)
STEP 4. Check the driver's side door switch ground circuit
Measure the resistance between the driver's side door switch body (metal section) and ground.
Q: Is the resistance less than two ohm?
YES: Go to Step 5.
NO: Repair the harness wire or connector.
STEP 5. Check the driver's side door switch connector E-33 input circuit
1. Disconnect the driver's side door switch connector E-33 and the harness side.
2. Measure the voltage between terminal 2 and ground.
Q: Is the voltage approximately 5 volts?
YES: There is no action to be taken.
NO: Go to Step 6.
STEP 6. Check driver's side door switch connector E-33 for damage.
Q: Is driver's side door switch connector E-33 in good condition?
YES: Go to Step 7.
NO: Repair them. Then check that the malfunction is eliminated.