Montero Sport ES 4WD V6-3.0L SOHC (2002)
Make mating marks on the radiator hose and hose clamp. Disconnect the radiator hose.
INSTALLATION SERVICE POINTS
>>A<< O-RING INSTALLATION
CAUTION: Do not allow engine oil or other grease to adhere to the O-ring.
Insert the O-ring to the water pipe, and coat the outer portion of the O-ring with water or engine coolant.
>>B<< WATER HOSE CONNECTION
To reuse the water hose, align the mating marks that were made during removal, and then install the hose clamp.
>>C<< GASKET INSTALLATION
Bend over the tabs to secure the gasket to the water passage assembly.
>>D<< RADIATOR UPPER HOSE CONNECTION
1. Insert each hose as far as the projection of the water outlet fitting.
2. Align the mating marks on the radiator hose and hose clamp, and then connect the radiator hose.
INSPECTION
Water Pipe and Hose Check
Check the water pipe and hose for cracks, damage and clogs. Replace them if necessary.