mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Fuel Injector > < Fuel System - EVAP DTC's & Check Engine Light|Page 2568
Page 1
background image

Fuel Pressure Release: Service and Repair

FUEL PUMP CONNECTOR DISCONNECTION (HOW TO REDUCE PRESSURIZED FUEL LINES)

When removing the fuel pipe, hose, etc., release fuel pressure to prevent fuel splay.

1. Disconnect the fuel pump relay connector
2. Start the engine and let it run until it stops naturally. Turn the ignition switch to "LOCK" (OFF).
3. Connect the fuel pump relay.

Fuel Injector > < Fuel System - EVAP DTC's & Check Engine Light|Page 2568