Montero Sport ES 4WD V6-3.0L SOHC (2002)
Seat Belt Tensioner: Service and Repair
Removal and Installation
WARNING:
-
Never attempt to disassemble or repair the seat belt pre-tensioner. If faulty, replace it.
-
Be extremely careful when handling the seat belt with pre-tensioner. Do not subject it to shocks, drop it, bring it close to strong magnets
or allow contact with water, grease or oil. Always replace it with a new part if any dents, cracks or deformation is found.
-
Do not place anything on top of the seat belt pre-tensioner.
-
Do not expose the seat belt with pre-tensioner to temperatures over 90 °C (194 °F).
-
After operating the seat belt pre-tensioner, replace the seat belt pre-tensioner with a new part
-
Gloves and protective goggles should be worn when handling a seat belt with pre-tensioner once it has been used.
-
If disposing of a seat belt with pre-tensioner which has not yet been used, its seat belt pre-tensioner should be operated first before
disposal.
REMOVAL SERVICE POINTS
[[A]] NEGATIVE (-) BATTERY CABLE DISCONNECTION
DANGER: Wait at least 60 seconds after disconnecting the battery cable before doing any further work.
