mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Starter Brush > < Ignition Switch|Description and Operation|Page 4268
Page 1
background image

Starter Armature: Testing and Inspection

ARMATURE CHECK

Armature Short Circuit Test

1. Check that the armature coil is not grounded.
2. Place the armature in a growler.
3. Hold a thin steel blade parallel and just above while rotating the armature slowly in the growler. A shorted armature will cause a blade to vibrate

and be attracted to the core. Replace the shorted armature.

Armature Coil Grounding Test

4. Check the insulation between the armature coil cores and the commutator segments. They are normal if there is no continuity.

Armature Coil Open Circuit Inspection

5. Check for continuity between the segments. The condition is normal if there is continuity.

Starter Brush > < Ignition Switch|Description and Operation|Page 4268