Montero Sport ES 4WD V6-3.0L SOHC (2002)
Front Steering Knuckle: Service and Repair
Disassembly and Reassembly
DISASSEMBLY AND REASSEMBLY <4WD
DISASSEMBLY SERVICE POINT
<<A>> NEEDLE BEARING REMOVAL
1. Remove the oil seal and take out the spacer.
2. Drive out the needle bearing by tapping the needles uniformly.
REASSEMBLY SERVICE POINTS
>>A<< NEEDLE BEARING INSTALLATION
CAUTION: Use care to prevent driving the needle bearing too far in.
1. Apply multipurpose grease to the roller surface of the new needle bearing.