mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 6011 > < Initial Inspection and Diagnostic Overview
Page 1
background image

Hood: Symptom Related Diagnostic Procedures

Symptom Chart

Inspection Procedure 1

Difficult Locking and Unlocking

STEP 1. Check the release cable routed correctly.

Q:

Is the release cable routing condition good? 

YES: Go to Step 2.

NO: Repair the release cable. Then go to Step 4.

STEP 2. Check the engagement of the hood latch and hood striker.

Q:

Are the hood latch and hood striker engaged correctly?

YES: Go to Step 3.

NO: Adjust the hood latch and hood striker. Then go to Step 4.

STEP 3. Check for proper lubrication of release cable.

Q:

Is the release cable properly lubricated? 

YES: Go to Step 4.

NO: Lubricate, then go to Step 4.

STEP 4. Retest the system.

Q:

Does the hood lock operate easily? 

YES: The procedure is complete. 

NO: Return to Step 1.

Inspection Procedure 2

Uneven Body Clearance

STEP 1. Check the clearance around the hood.

Q:

Is the clearance around the hood even?

YES: Go to Step 2.

NO: Adjust the hood. Then go to Step 2.

STEP 2. Retest the system.

Q:

Are the clearances between body panels even? 

YES: The procedure is complete.

Initial Inspection and Diagnostic Overview|Page 6011 > < Initial Inspection and Diagnostic Overview